Monthly Archives: November 2015

Lowongan kerja di Manufaktur 2015: Internal Audit Staff

DIBUTUHKAN SEGERA
Perusahan berskala Nasional membutuhkan tenaga yang trampil, pekerja keras, ulet, mampu bekerja secara professional untuk ditempatkan pada posisi sbb :

INTERNAL AUDIT STAFF 
– Pria, usia max. 30 th
– Pendidikan min. S1 Accounting / Manajemen
– Pengalaman dibidang yang sama 1 tahun
– Dapat berkomunikasi dengan baik
– Mempunyai motivasi dan kemauan kerja yang kuat
– Bersedia perjalanan dinas keluar kota

Kirim lamaran dan ditujukan ke : sap.hrd@sankencorp.com

Src: lautankerja

Lowongan kerja Quantity Surveyor 2015

QUANTITY SURVEYOR (QS)

Berpengalaman 1-3 tahun di kontraktor bangunan High Rise Building  sebagai Quantity Surveyor 
Pendidikan STM Bangunan atau D3/S1 Teknik Sipil
Memahami dokumen kontrak, Rencana Anggaran Proyek
Menguasai analisa biaya & scheduling
Memahami teknik konstruksi & perkembangannya
Menguasai dan mengikuti perkembangan harga material, upah dan alat
Menguasai gambar kerja
Mahir mengoperasikan komputer
Bersedia ditempatkan di proyek Jawa (Jakarta, Surabaya, Bali) dan luar Jawa.

Hanya lamaran lengkap dan memenuhi syarat yang akan diproses

Kirimkan lamaran lengkap beserta CV dan pas photo 4×6 berwarna terakhir

melalui Email (cantumkan kode jabatan di subject)

untuk Jakarta
recruitment@tatamulia.co.id
untuk Surabaya
hrd@tatamulia-surabaya.co.id
untuk Bali
hrd@tatabali.com

atau

melalui Pos (cantumkan kode jabatan disudut kiri amplop)

untuk Jakarta
PT TATAMULIA NUSANTARA INDAH
Sapta Mulia Center Lt.2
Jl. Rawa Gelam V Kav.OR-3B
Kawasan Industri Pulogadung
Jakarta 13930

untuk Surabaya
PT TATAMULIA NUSANTARA INDAH
Manyar Megah Indah Plaza Blok.K30-32
Jl. Ngagel Jaya Selatan
Surabaya 60284

untuk Bali
PT TATAMULIA NUSANTARA INDAH
Jl. Danau Poso No.14X/43
Sanur, Denpasar 80227
Bali

Training oil & gas 2015 di bidang Construction

BASIC CONSTRUCTION ENGINEERING FOR HEAVY STEEL CONSTRUCTION

Latar Belakang Program Training

Sering terjadi ketika perusahaan mendapatkan proyek, pihak HRD menghadapi kesulitan merekrut construction engineer yang memiliki 3-5 tahun pengalaman. Di lain pihak perusahaan memiliki keraguan merekrut fresh engineer karena tidak ada waktu untuk memberikan training bagi mereka sebab proses rekrutmen umumnya dilakukan ketika perusahaan sudah tandatangan kontrak proyek.

Kebutuhan akan construction engineer juga didorong oleh rencana pemerintah yang ingin mempercepat pembangunan infrastruktur. Percepatan pembangunan akan membutuhkan banyak construction engineer.

Hal lain yang menjadi antisipasi adalah MEA 2015 (tatanan Masyarakat Ekonomi Asean yang diberlakukan akhir 2015). Jika nantinya SDM dari dalam negeri tidak tersedia maka engineer luar negeri akan mendapat legitimasi untuk mengisi lowongan yang diperlukan. Tentu ini menjadi keprihatinan tersendiri. Membatasi engineer luar negeri dengan berbagai aturan adalah hal penting, namun ini perlu diimbangi dengan upaya peningkatan skill bagi SDM dalam negeri.

Berdasarkan fakta tersebut, maka program training dan workshop bagi engineer muda menjadi suatu kebutuhan penting saat ini. Basic Construction Engineering for Heavy Steel Structure ini merupakan Training dan workshop yang digagas oleh IAFMI ini dirancang untuk memberikan applied skill set yang diperlukan oleh seorang construction engineer.

Konsep Materi Training

Materi construction engineering dirancang untuk mendukung kebutuhan proyek-proyek heavy steel construction, beberapa diantaranya adalah :

Platform fabricationOil RefineryPetrochemicalPower PlantOnshore Pipe-layingMining EquipmentsContainer Crane fabrication/ material handlingHeavy Lifts, dan lain-lain

Construction engineering know-how merupakan applied engineering knowledge dan field experience yang dirangkum dari pengalaman kerja. Disamping itu materi training juga dirancang untuk memberikan arahan (guidance) bagaimana memahami International Standards & Codes yang dipakai di dalam industri konstruksi. Keseluruhan materi yang akan disampaikan dalam training disusun dalam silabus sebagai berikut :

I.     Leadership Skill

Project Organization and Communication Lines.Role and Responsibility of Engineer in Project Organization.Function of Standard and Code in Business.Roadmap to Project Management Level.

II.    Standard Engineering Document

Map of Engineering Documents in Contract Document.Document Numbering System and Document Classification.Master Document Register (MDR).Standard Drawing Format.

III.   Material Specifications and Codes

Purpose to Learn Material Specifications and Codes.Basis for Selection of Steel Grade and Testing Requirements.Classification of Structural Members.Standard Test and Supplementary Test Requirements Commonly Used in the Design.Guideline to ASTM Book.Steel Specification Based on ASTM Standard.Detail Explanation of Supplementary Tests :Supplementary Test – Maximum Carbon Equivalent (CE-max).Supplementary Test – Charpy V-Notch Impact Test.Supplementary Test – Thru Thickness Properties Test.Supplementary Test – Ultrasonic Test (UT).Material Description of Plates, Rolled Shapes, Tubular.Steel Specification Based on API Standard.Manufacturing of Welded Tubular Based on API 2B.Fasteners (Bolt and Nut).Comparison Among Steel Standards.Rules of Tubular Joint Connections.Review Design Drawings and Shop Drawings.Bill of Materials. 

IV.  Basic Welding

Welding Process and Principle of Arc Welding.Detail Welding Process of SMAW, FCAW, GMAW, SAW, GTAW, Arc Gouging.Application of Welding Process for Structure and Piping.Welding Position for Flat Welds and Round Welds.Welding Rod Numbering System.Grouping of Steels to Match with Filler Metal based on AWS D1.1.Overview of Welding Procedure (WPS and PQR).Welder Qualification and Certification.Welding Symbols.

V.    Basic Lifting and Rigging

Basic Understanding of Lifting and Rigging.Wire Rope, Sling, Shackle.Pulley System for Hoisting.Cranes – Basic component, Load Chart, Rated Capacity vs Net capacity.Failure in Crane Operations.Load Factor for Lifting Operation.Dynamic Amplification Factor (DAF).Load Distribution and Sling Angle.Other Rigging Practices.

VI.  Quality and HSE

Understanding of Quality Objective.Standard Operating Procedures.Understanding of HSE Objectives.HSE Golden Rules.Job Risk Analysis (JRA).SHOC Card.

Biodata Pengajar

Ir Fabianus Endro Kartiko, MM ialah Project Manajer di PT Gunanusa Fabricator dengan background pendidikan S1 Teknik Sipil ITS dan Magister Finance Management STIE. Beliau sudah berpengalaman lebih dari 27 tahun di bidang Industri Gas dan MInyak, especially di bidang Construcion Engineering.

Beliau menjadi kontraktor project manager pada beberapa EPSC projects dengan Client Hess Pangkah Ltd, BP Berau Ltd, dan Total E&P Indonesia. Pernah menjabat sebagai project procurement manager, contract administration manager, Fabrication-Yard manager, construction engineering manager, dan juga sebagai heavy lift engineer.

Tahun 1990 ia ditugaskan 1 bulan penuh di Sofresid Engineering office Paris untuk ikut dalam desain BZZA platform milik ARII (sekarang PHE ONWJ). Tahun 1995 ditugaskan 4 minggu di CP&A Engineering office di Tacoma, Washington, USA untuk desain container crane milik PELINDO II. Tahun 2000 berkesempatan mengunjungi Welding Training Center ESAB di Guthenberg, Swedia, sekaligus mendiskusikan problem welding yang dihadapi Yard saat itu. Berbagai pengalaman di atas diterapkan pada konsep dan materi training yang disusunnya.

Biaya dan Cara registrasi

Registrasi di alamat www.theepm.com, pilih menu School of Project.

WAKTU DAN TEMPAT

JATINANGOR, part 1 (BAB I-III) : 6 dan 7 November 2015

                          Part 2 (BAB IV-VI) : 21 November 2015

INVESTMENT COST

Umum  Rp. 6.000.000 per-paxAnggota IAFMI  Rp 4.000.000 per-pax, dibuktikan dengan kartu anggota IAFMIAnggota KMI Rp 4.500.000 per-paxStudent (S1) or Graduated (S1) tahun 2015  Rp 2.000.000 per-pax, dibuktikan dengan ID Mahasiswa atau  Ijasah.

PEMBAYARAN

Transfer ke Bank Mandiri cabang Bogor dengan no rekening  133 001 264 2542  PT. Edwin Primadaya Mandiri

More Info email: sop@theepm.com , Telp 021 29651136
The EPM: Equity Tower 49FL, SCBD Kav 52-53 Jalan Sudirman-Jakarta 12190

Lowongan kerja Mining 2015: PT Dwinad Nusa Sejahtera

URGENTLY REQUIRED

PT. DWINAD NUSA SEJAHTERA, Gold Mine Company, subsidiary company of Sumatera Copper & Gold operated at Musi Rawas Utara District seeking for qualified candidates for:

A. OPERATION MANAGER – Code : DNS-OPRM

• Bachelor Degree in Mine Engineering
• Minimum 15 years experiences both in Underground and open pit for metal mine
• Excellent organizational, analytical and communication skill

B. SENIOR UNDERGROUND MINE ENGINEER – Code : DNS-SRUM

• Bachelor Degree in Mine Engineering
• Minimum 10 years Underground engineering and operations experiences for metal mining
• Computer skills in in engineering software : surpac, minesched, etc.

C. SENIOR OPEN PIT MINE ENGINEER – Code : DNS-SROM

• Bachelor Degree in Mine Engineering
• Minimum 10 years open pit experiences for metal mining
• Computer skills in in engineering software : surpac, minesched, etc.

D. MINE SUPERVISOR – Code : DNS-MSPV

• Min. SLTA
• Minimum 15 years experience in mining, preferably in metal mining
• Having Mine Certificate ( POP or POM )

E. WAKIL KEPALA GUDANG HANDAK (MAGAZINE KEEPER) – Code : DNS-AMKR

• Min. SLTA
• Minimum 3 years experience in as Magazine Keeper
• Having Certificate of Legalisation For Second Class Blaster

Requirements:
• Team player, strong safety focus, planning and communication skills
• FIFO 4/2 Indonesia
• Fluent Bahasa and English
• Willing work in a Mining Environments
• Good personalities, self-confidence, high motivation and hard working

If you meet with the above requirement, please send your application letter, curriculum vitae with recent photograph no later than October 22nd, 2015 only by email to : 
dns.jobs@scgplc.com

With subject on the email as follows: 
• OPERATION MANAGER : DNS-OPRM -your name
• SENIOR UNDERGROUND MINE ENGINEER : DNS-SRUM -your name
• SENIOR OPEN PIT MINE ENGINEER : DNS-SROM -your name
• MINE MANAGER : DNS-MSPV -your name
• WAKIL KEPALA GUDANG HANDAK : DNS-AMKR-your name

Src: petromindo

Lowongan kerja Safety 2015

SAFETY SUPERVISOR (SS)

Berpengalaman 3-5 tahun di kontraktor bangunan High Rise Building sebagai Safety Supervisor 
Pendidikan D3/S1 Umum/Kesehatan Masyarakat/Teknik Sipil
Menguasai Sistem Manajemen OHSAS 18001:2007, Sistem Manajemen Keselamatan & Kesehatan Kerja (SMK3) Konstruksi serta mampu menerapkannya
Menguasai jenis peralatan dan kelengkapan Keselamatan & Kesehatan Kerja (K3), Mempunya sertifikasi AK3 Konstruksi
Menguasai dasar-dasar administrasi
Lebih diutamakan mahir mengoperasikan komputer
Bersedia ditempatkan di proyek Jawa (Jakarta, Surabaya, Bali) dan luar Jawa

Hanya lamaran lengkap dan memenuhi syarat yang akan diproses

Kirimkan lamaran lengkap beserta CV dan pas photo 4×6 berwarna terakhir

melalui Email (cantumkan kode jabatan di subject)

untuk Jakarta
recruitment@tatamulia.co.id
untuk Surabaya
hrd@tatamulia-surabaya.co.id
untuk Bali
hrd@tatabali.com

atau

melalui Pos (cantumkan kode jabatan disudut kiri amplop)

untuk Jakarta
PT TATAMULIA NUSANTARA INDAH
Sapta Mulia Center Lt.2
Jl. Rawa Gelam V Kav.OR-3B
Kawasan Industri Pulogadung
Jakarta 13930

untuk Surabaya
PT TATAMULIA NUSANTARA INDAH
Manyar Megah Indah Plaza Blok.K30-32
Jl. Ngagel Jaya Selatan
Surabaya 60284

untuk Bali
PT TATAMULIA NUSANTARA INDAH
Jl. Danau Poso No.14X/43
Sanur, Denpasar 80227
Bali

Tutorial: Electrical – cara membaca wiring diagram

Bagi anda yang sudah atau ingin bekerja di bidang migas (oil & gas) pengetahuan berikut berguna untuk memahami rangkaian listrik di fasilitas migas atau sejenisnya.

Wiring diagram adalah gambar skematik yang menggambarkan alur dari arus listrik, yang umumnya terdiri dari sumber tenaga ( pembangkit listrik, UPS atau baterai), beban atau pengguna listrik seperti lampu, motor untuk pompa/kompresor/blower atau perlatan lainnya yang digerakan oleh medan listrik yang menggerakan motor.

Silahkan saksikan tutorial (bagian 1) pada tautan di bawah ini untuk menambah wawasan kita, atau kunjungi http://www.rekanusa.org untuk mendapat training gratis di bidang ini.

Lowongan kerja 2015 di Newmont

A Great Place to Work

PT Newmont Nusa Tenggara (PTNNT) operates the Batu Hijau copper/gold mine in West Sumbawa, West Nusa Tenggara Province (NTB). PTNNT is committed to becoming a leader in safety, environmental stewardship and social responsibility. The Company is inviting skilled, trained, highly committed and dedicated Indonesian workers and professionals to be a part of our team for the positions:

• ISY0611 SR. SPEC. – IT PROJECT MANAGEMENT
This position is within IT Department and provides support to Information and Technology (IT) Operations on the new project development, management and implementation.

• PRD0010 ENGINEER – ELECTRICAL & INSTRUMENTATION
This position performs and coordinates the design engineering for the Projects/Engineering Department.

Please visit our on-line application system at
https://Recruitment.ptnnt.co.id for further information about the jobs and the job application process.

Applications must be submitted by 20 October 2015. Only short-listed candidates will be notified.

Src: petromindo

Lorongan kerja oil & gas terbaru 2015: Drilling Manager

PT SELE RAYA MERANGIN DUA

PT Sele Raya Merangin Dua adalah Kontraktor Kontrak Kerja Sama dari SKK Migas, membutuhkan tenaga kerja profesional untuk mengisi posisi:

DRILLING SUPERINTENDENT

Desired Expertise: Drilling Operations
Experience: min. of 20 years Exp. for on shore drilling operations
Minimum Education: Bachelor Degree
Certificates: IADC/APIII

Job Description

Develops scope and detail of proposed drilling projects for Indonesia operationsCoordinate with all drilling staff in planning well programsCoordinating logistics and preparing budget programsSupervise COMPANY s drilling rigs and operationsTo prepare all reports required by COMPANYCommunicate with Company Representative to drilling operations troubleTo ensure that operation are conducted in a save mannerAnalyze operations hazard & sensitive to the environmental protectionMaintain liaison with specialized technical personnel during drilling & completion activatesTo provide supervision of onsite operations or provide onsite supervision of critical wellbore activities

Lamaran dapat dikirimkan ke e-mail:
hrd@srmd.co.id
dengan subject Drilling Manager

Src: petromindo.com

Lowongan kerja 2015 di Oman

OPENING @ORPIC – OMAN

Oman Oil Refineries and Petroleum Industries Company (ORPIC – (www.orpic.om), Created from the integration of three companies – Oman Refineries and Petrochemicals Company LLC (ORPC), Aromatics Oman LLC (AOL) and Oman Polypropylene (OPP) – Orpic is one of Oman`s largest companies and is one of the most rapidly growing businesses in the Middle East`s oil industry. PT. Binamandiri Muliaraharja is currently recruiting for ORPIC, for the following positions :

1. Sr. Engineer – Rotating Equipment – Bachelor Degree of Mechanical Engineering with At least 10 years’ experience in maintenance function of Refinery, Petrochemicals or Fertilizers. Knowledgeable with PMs and Overhaul of different Rotating Equipment

2. Team Leader – Rotating Equipment – Bachelor Degree of Mechanical Engineering with At least 15 years’ experience in maintenance function of Refinery, Petrochemicals or Fertilizers. Knowledgeable with PMs and Overhaul of different Rotating Equipment. At 2 years on Team Lead capacity.

3. Team Leader – Predictive Maintenance – Bachelor Degree of Mechanical Engineering with At least 15 years’ experience in maintenance function of Refinery, Petrochemicals or Fertilizers. Knowledgeable with condition monitoring and analysis of different Machinery Equipment. At 2 years on Team Lead capacity.

4. Supervisor – Predictive Maintenance – Minimum Diploma of Mechanical Engineering with At least 8 years’ experience in maintenance function of Refinery, Petrochemicals or Fertilizers. Knowledgeable with condition monitoring and analysis of different Machinery Equipment.

5. Supervisor – Rotating Equipment – Minimum Diploma of Mechanical Engineering with At least 8 years’ experience in maintenance function of Refinery, Petrochemicals or Fertilizers. Knowledgeable with PMs and Overhaul of different Rotating Equipment

6. Supervisor – Static Equipment – Minimum Diploma of Mechanical Engineering with At least 8 years’ experience in maintenance function of Refinery, Petrochemicals or Fertilizers. Knowledgeable with PMs and Overhaul of different Static Equipment

7. Sr. Engineer – Static Equipment – Bachelor Degree of Mechanical Engineering with At least 10 years’ experience in maintenance function of Refinery, Petrochemicals or Fertilizers. Knowledgeable with PMs and Overhaul of different Static Equipment

8. Team Leader – Static Equipment – Bachelor Degree of Mechanical Engineering with At least 15 years’ experience in maintenance function of Refinery, Petrochemicals or Fertilizers. Knowledgeable with PMs and Overhaul of different Static Equipment. At 2 years on Team Lead capacity.

9. Sr. RCM Engineer – Bachelor Degree of Mechanical Engineering with At least 10 years’ experience in maintenance function of Refinery, Petrochemicals or Fertilizers. Knowledgeable in execution of Reliability Centred Maintenance (RCM) and implement a sustainable and structured maintenance improvement process, based on Reliability Centred techniques for different Rotating Equipment

Send your resume to recruitment@binamandiri.com Subject : ORPIC (Position Name), before 1st November 2015. Send your file in uncompressed file with PDF or DOC format

The positions are applicable for INDONESIA, MALAYSIA, PHILIPPINE, SINGAPORE and VIETNAM Nationalities ONLY

ONLY SHORTLISTED CANDIDATES WILL BE CONTACTED

RECRUITMENT VENDOR :
PT. Binamandiri Muliaraharja
Jalan Kartini No.1 Malang – Indonesia 65111
P. +62 (341) 347474 | F. +62 (341) 366566 | Email info@binamandiri.com
Follow us @ www.facebook.com/ptbinamandiri

Src: petromindo

Lowongan kerja oil & gas 2015: Mechanic position

FUGRO – A LEADING GLOBAL SERVICE PROVIDER

PT Fugro Indonesia is a multi-discipline geotechnical and survey company in Indonesia. Being part of the world-wide Fugro Group it is a high technology company, which provides a broad range of services in the fields of onshore/offshore geotechnical, offshore marine, geophysical, positioning and construction surveying.

Mechanic

Requirements:
• Candidate to be a Certified Mechanic. 
• Have experience with heavy equipment /Geotechnical Equipment
• Min. 5 year experiences in relevant field. 
• To be a hands-on professional have the ability to work independently. 
• Experience with Maintenance Systems of plant and capable to maintain the records. 
• Proficiency in English both oral and written
• Computer literary
• Detail oriented & well organized
• Have a good knowledge in safety management systems.

Responsibilities:
• Maintenance and repair of the geotechnical equipment. 
• Record keeping of equipment maintenance systems. 
• Record keeping of equipment. 
• Ensuring the compliance of HSE system and procedure. 
• To support the workshop Coordinator and technical team in using field equipment

Remuneration will reflect the levels of experience, qualification and those rates prevailing within in the industry generally.

Applications in English writing along with a current Curriculum Vitae, with current and expected salary, should be sent to :

Email : hrd@fugro.co.id OR

Visit our Fugro website: www.fugro.com

Src: petromindo.com